Fiber Optic Cables | Fiber Trunk Cables | Innerduct | Bulk Fiber Cable |   Stock Fiber Patch Cord  |  Fiber Attenuators

FIBER OPTIC CABLES

Communication Cable Company manufactures fiber patch cords using the highest quality cable and connectors.  All assemblies are tested to ensure low db loss.  We stock an extensive range of standard length cables for your convenience. Same day shipment is available for many patch cables!

Save time and money by purchasing multi-fiber assembled cables in custom lengths and eliminate the need for field assembly. Communication Cable Company manufactures cables using any combination of connectors and cable types. The choice is yours, call with your specific requirements.

Test data is available upon request.

ST		Cylindrical with twist lock coupling, 2.5 mm keyed ferrule. (For both short distance applications and long line systems).
SC		Square, keyed connector with push- pull mating, 2.5mm ferrule &molded housing for protection.
FDDI		Duplex connector, with fixed shroud, keyed.
FC		Cylindrical with metal coupling and keyed sleeve, 2.5mm ceramic ferrule.
ESCON		Duplex connector, with retractable shroud.  (For IBM ESCON or compatible systems).
SMA905		3.2mm ferrule.
SMA906		3.2mm ferrule, recessed tip.
MTRJ

PULLING EYE ASSEMBLIES

Multi-stranded cable assemblies complete with a pulling eye are available for easy installation.  Simply pull the cable via the pulling eye and then cut away the sheath to reveal the pre-terminated connectors of your choice - ready to plug and play. More information on Multi-Fiber Trunk Cables.

FIBER ATTENUATORS

Fiber attenuators are used to control the power level of optical signals in optical communication at the output of Light Sources, E/O Converters, and also for the testing of linearity or dynamic range of Photosensors, Photodetectors, etc.  Fiber type attenuators becomes popular because it is advantageous with regard to adaptability to a receptacle structure and spliceability to a transmission fiber.  Some of the features of Attenuators are - Precise Attenuation Value - Environmental Stable and Reliable - Excellent Return Loss - Bi-Directional Non Air Gap.

For More Information on Fiber Attenuators click here.

 INNERDUCT

Supplied in 250' and 500' boxes.  Custom lengths available for a nominal cut charge.

	INNERDUCT1.00	HDPE WITH PULL ROPE
	INNERDUCT1.25	HDPE WITH PULL ROPE
	INNERDUCT1.50	HDPE WITH PULL ROPE
	INNRDUCT1.00P	PLENUM WITH PULL TAPE
	INNRDUCT1.50P	PLENUM WITH PULL TAPE

 
BULK FIBER OPTIC CABLE

Multimode fiber optic cable:  This cable is used in most LAN applications, and has many other uses as well.  This class of cable has a number of different core diameters, the most common being 62.5/125 micron fiber.  Other sizes are available by special order. Singlemode fiber optic cable: This is the cable of choice in "longhaul" applications, such as long distance telephone lines, long runs between buildings, or in high speed applications like "sonet" rings.  The fiber diameter is 8.5/125 microns.  See our Singlemode Page for a currently available list of bulk singlemode cable.

Fiber cables come packaged in many different styles to suit a variety of needs from direct burial underground cables and aerial cables with messenger wire to inside plenum cables, and special "mil-spec" cables for severe duty or disaster recovery.

The following categories of cable give a rough idea of the many styles of fiber available, and some of the considerations involved in choosing  the "right fiber" for your application.

Distribution Cable (900 Micron Tight Buffered)	Break-Out Cable (Tight Buffered Individually Jacketed)
Aerial "Figure 8" Cable	Jumper Cord
Loose Tube Cable (Outside Plant)

Please contact us with your requirements.

TEL: 1-800-591-9518
FAX: 610 889 0484
E-Mail: sales@commcable.com

 

Home  |  Company  |  Products  |  Feature  |  Search  |  Contact Us  |  Employment

Copyright © 2000 Communication Cable Company.  All rights reserved.